Phone Borneo

Resistive and the LCD display is tough to completely and accurately all the points with, so addition to calibration of precision mechanical assembly technologies, the use of computer software need to also be calibrated prior to. This post describes the calibration system initial determine the source of error, and then export the three chosen points, touch-screen calibration matrix, and use the software system to implement the corresponding relation in between points of calibration. To master this method for reducing the price of embedded systems is vital.
Figure 1 shows a resistive touch-screen cross-section, its structure is rather hassle-free, from top rated to bottom the relative placement of two pieces of glass composition, the inner surface of glass coated with a thin layer of conductive material, and applied some little glass beads across the surface of the conductive open. When the finger or stylus press the glass surface, the upper speak to with the lower glass bending glass. The structure of glass beads determines the distance in between the touch screen sensitivity. The even more glass beads placed near each other, the sensitivity the smaller the better the pressure crucial to make dependable make contact with with two layers of glass.

Touch screen calibration process - mxpopstar - The Frozen Throne
Figure two shows the equivalent circuit of touch-screen. By means of a touch screen controller (AD converter) to the power of the positive and unfavorable added to a conductive layer of the glass at both ends, and the other a piece of glass on the conductive layer is to play the role of a potentiometer cursor. On glass of diverse touch points, conducting the scenario is different, digital converter will be recorded in the completely different test voltage value, then controller will be recorded in the voltage value converted into a two-dimensional coordinates: X-axis coordinates and Y coordinates of .